Filter
Top Products
28
Track View Window
Track Parameter Section
The Track Parameter Ch (channel) display has been changed to the Ch/Pan display, and the fol-
lowing function has been added:
n For details about the Track View Window, see page 41 of the XGworks V2.0 Owner’s Manual.
n When using the SW1000XG sound card, set the Track Parameter Section Port displays as follows:
When the track type is MIDI: SW1000 #1 (or #2) Synthesizer
When the track type is WAVE: SW1000 #1 - #6 WAVE OUT
When WAVE is selected as the track type in the TYPE display, it becomes possible to set the pan
(stereo position) of the wave data in the Ch/Pan display.
n When MIDI is selected as the track type, the output MIDI channel is set in the Ch/Pan display.
❑ Range of settings: L7-L1, C, R1-R7
Each wave out device (SW1000 #1 - #6 WAVE OUT) corresponds to two audio parts of the
SW1000XG sound card. For example, wave output through the SW1000 #1 WAVE OUT is sent to
the SW1000XG audio parts PCI 1 and PCI 2 (→ P. 26).
In case of monaural wave track:
Setting the Ch/Pan value to L1-L7 will send more wave data to the odd numbered PCI part (PCI
1, 3, 5, 7, 9 or 11). Setting the Ch/Pan value to R1-R7 will send more wave data to the even num-
bered PCI part (PCI 2, 4, 6, 8, 10 or 12). Setting the Ch/Pan value to C will send wave data
equally to both odd and even numbered PCI parts.
In case of stereo wave track:
Regardless of the Ch/Pan setting, wave data will be sent equally to both odd and even numbered PCI parts.
By using the SW1000XG mixer (→ P. 32), you can control panning of each PCI part individually.
SW1000XG-E.qx 4/2/99 4:31 PM Page 28