Filter
Top Products
■ Volume is low.
• Is volume or expression set too low in the part control?
• Are the velocity sense settings in the part edit made incorrectly?
• Is the MIDI volume information not being received?
■ Distorted sound/weak sound on the A/D input
• Is the input source selected correctly? (→ P. 35)
■ No effects applied at all.
• Has send/return been raised sufficiently?
■ Effects not applied to some parts
• Has the send level been raised sufficiently for each of the parts or drum part
instruments?
■ The tone is strange
• Are the bank select/program change settings made correctly?
■ The pitch is strange.
• Are the master tune, transpose and note shift settings correct?
■ Interruptions in the sound
• Has the maximum polyphony limit of 64 voices been exceeded? (→ P. 23)
Keep in mind that when one channel is specified for multiple parts, all the multi-
ple parts will begin playing simultaneously with one Key On.
■ MIDI bulk data is not being received correctly
• Is the device number specification correct?
• Was the dump interval time set too short when the data was saved?
44
SW1000XG-E.qx 4/2/99 4:32 PM Page 44