Filter
Top Products
7
980261 -001 Rev. B
3. Load ribbon onto the supply spindle
(under print head carriage) and empty core
(with tape attached) onto the take-up spindle.
Make sure the ribbon comes off of the top of
the supply spindle and feeds to the top of the
take-up spindle.
4. Push down on the Print Head Lock Lever
until an audible 'click' signals the locked-down
position.
Please note that the ribbon automatically
synchronizes whenever the print head lock down
occurs with the P310C only,
The ribbon will not synchronize on the P310F.
5. Close Cover.
SUPPLY SPINDLE
TAKE-UP SPINDLE
`CLICK'