Filter
Top Products
39
Maintenance
Cleaning
12/8/2010 ZP 450 User Guide P1031442-001
Cleaning the Printhead
Always use a new cleaning pen on the printprintheadhead (an old pen carries contaminants
from its previous uses that may damage the printhead).
When you load new media, you can also clean the printhead.
1. Rub the cleaning pen across the dark area of the printhead. Clean from the middle to the
outside. This will move adhesive transferred from the edges of media to the printhead
outside of media path.
2. Wait one minute before closing the printer.
Caution • The printhead becomes hot while printing. To protect from damaging the
printhead and risk of personal injury, avoid touching the printhead. Use only the cleaning pen
to perform maintenance.