Filter
Top Products
ZNYX NetBlaster 470 Series cPCI Fast Ethernet Adapter User’s Guide Page 7
4. To test all channels of your adapter, run DIAG478 for each bus number and device number.
For example, if you have a ZX478 the bus number is 2 and the device numbers are 412 and
512, run:
>DIAG478 2 412
>DIAG478 2 512
5. If the DIAG478 program says:
Running diagnostics for ZX478 channel at Bus #2, Device #412
Configuration: I/O=400E800, IRQ=10, Node=00C095C003D0, PROM=Version 4/AI
Diagnostics successfully completed.
each time, proceed with the software installation.
6. If the DIAG478 program does not indicate a successful completion, refer to the next section
on Troubleshooting.