Filter
Top Products
Chapter 1: Setting Up Your USB Faxmodem 7
For both the Macintosh and the PC, the installation inter-
face also provides for uninstalling the drivers, if you ever
need to.
One final note: Don’t install any of the other software on
the Zoom Link CD at this time.
Connecting the Faxmodem to Your Computer
1
Find the serial number of your faxmodem on the bot-
tom of the case, just under the bar code. Write the
number in the Important Information table on the last
page of this manual.
2
You do not have to shut down your computer. Connect
the cable. Plug the cable’s square end into the USB
jack on the back of the faxmodem. Plug the other,
rectangular end into the USB connector on your com-
puter.
3
Your computer will display a message that it has de-
tected new software and is installing it.
4
Connect the telephone cord. Plug one end of the cord
into the PHONE LINE jack on the back of the faxmo-
dem. Plug the other end into the wall jack just as you
would a standard telephone. You may also connect
your regular telephone to the back of the faxmodem, in
the jack labeled PHONE. See the following illustration.
The faxmodem works with or without a telephone con-
nected to it.