Zoom 5590C Modem User Manual


  Open as PDF
of 3
 
f
ff
f Do not interrupt the firmware loading process! Please wait until the web page status
changes to "Firmware Update Complete." This process may take several minutes.
Note: If, while the firmware is being loaded (when the # characters are moving across a
line), the page suddenly displays "page cannot be displayed," DO NOT power cycle or
turn off the X6. Instead, log back into the modem at http://10.0.0.2 and click on
Advanced Setup, Firmware Upgrade and then click the More button to display the
Upgrade page again.
g
gg
g When prompted to reboot, click the Reboot button. The POWER light will turn red and
then the rest of the lights will turn off briefly. Please wait about 45 seconds, until the DSL
light starts to blink again.
h
hh
h Return to Step 8 above and re-apply the 5.0.8 firmware file.
 previous