Filter
Top Products
56 ADSL X4 User Guide
Problem
My X4’s DSL light continually blinks and does not stay steady on.
Solution
There are several issues that could cause this problem. Check these
items:
• Ensure that the phone cord is firmly plugged into the wall jack
and the ADSL jack on the back of the X4.
• Verify that the jack the phone cord is connected to is enabled
for ADSL service. Unless your service provider has enabled it,
you cannot use a standard telephone jack for ADSL service.
• Your phone cord may be defective. Replace the phone cord
with a known good one.
• You have installed phone filters on all the phones and fax
machines using the same ADSL line as the X4. These devices
can produce noise and interfere with your ADSL connection.
Problem
I cannot log into the Zoom Configuration Manager. I have
typed http://10.0.0.2 or http://10.0.0.3 (depending on whether I
am using the X4’s Ethernet jack or USB port), but I am not
prompted for a User Name and Password.
Solution
There are several issues that could cause this problem. Check these
items:
• If you are using a Macintosh or Linux computer, your TCP/IP
settings may not be properly configured. See page
46 for more
information.
• If you are using Mac OS X 10.3 and above, renew your IP
address: Point to System Preferences, then choose Network.
Click the Configure button and then the Renew DHCP
Lease button.