Filter
Top Products
ZyWALL 10 Internet Security Gateway
7-4 Filters
7.2 Configuring a Filter Set
To configure a filter set, follow the procedure below. For more information on menus 21.2 and 21.3, please
see Part 4.
Step 1. Select option 21. Filter Set Configuration from the main menu to open menu 21.
Figure 7-4 Menu 21 — Filter and Firewall Setup
Step 2. Enter 1 to bring up the following menu.
Figure 7-5 Menu 21.1 — Filter Set Configuration
Step 3. Select the filter set you wish to configure ( 1-12) and press [ENTER]
.
Step 4. Enter a descriptive name or comment in the Edit Comments field and press [ENTER].
Step 5. Press [ENTER] at the message [Press ENTER to confirm] to open Menu 21.1.1 - Filter Rules
Summary.
Menu 21.1 - Filter Set Configuration
Filter Filter
Set # Comments Set # Comments
------ ----------------- ------ -----------------
1 NetBIOS_WAN 7 _______________
2 NetBIOS_LAN 8 _______________
3 --------------- 9 _______________
4 --------------- 10 _______________
5 _______________ 11 _______________
6 _______________ 12 _______________
Enter Filter Set Number to Configure= 0
Edit Comments= N/A
Press ENTER to Confirm or ESC to Cancel:
Menu 21 - Filter and Firewall Setup
1. Filter Setup
2. Firewall Setup
3. View Firewall Log
Enter Menu Selection Number: