Filter
Top Products
Chapter 6 Wireless LAN
NWA1000 Series User’s Guide
77
6.6.3 Security: WPA2-PSK, WPA2-PSK-MIX
Use this screen to employ WPA2-PSK or WPA2-PSK-MIX as the security mode of your NWA. Select
WPA2-PSK or WPA2-PSK-MIX in the Security Mode field to display the following screen.
Figure 33 Security: WPA2-PSK or WPA2-PSK-MIX
The following table describes the labels not previously discussed
Security Mode Choose the same security mode used by the AP.
Rekey Option
Reauthentication
Time
Specify how often wireless stations have to resend user names and passwords in order to
stay connected.
Enter a time interval between 0 and 3600 seconds. Enter “0” to turn reauthentication off.
If wireless station authentication is done using a RADIUS server, the reauthentication timer
on the RADIUS server has priority.
Enter how often the external authentication server
requires a connected wireless client to reauthenticate itself to the server again.
Enable Group-key
Update
Group Key Timer is the rate at which the RADIUS server sends a new group key out to all
clients. Click the check box to enable the Group Key Update and type a number between
100 and 3600 for the time rate.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 19 Security: WPA2 for Wireless Client (continued)
LABEL DESCRIPTION
Table 20 Security: WPA2-PSK or WPA2-PSK-MIX
LABEL DESCRIPTION
Profile Name This is the name that identifying this profile.
Security Mode Choose WPA2-PSK or WPA2-PSK-MIX in this field.
Pre-Shared Key Type a pre-shared key from 8 to 63 case-sensitive ASCII characters (including spaces
and symbols).