Filter
Top Products
Chapter 7 LAN and VLAN
NWA1000 Series User’s Guide
91
IPv6 Address
Assignment
Enable Stateful
Address Auto-
configuration
Select this to turn on IPv6 stateful auto-configuration to have the NWA obtain an
IPv6 global address from a DHCPv6 server in your network.
IPv6 Address/Prefix
Length
Enter your IPv6 address and prefix manually.
System DNS Servers
Primary DNS Server Enter the IPv4 address of the first DNS (Domain Name Service) server, if provided.
Secondary DNS Server Enter the IPv4 address of the second DNS (Domain Name Service) server address, if
provided.
VLAN Settings
802.1q VLAN Select this to enable VLAN tagging on the NWA.
Management VLAN
ID
Enter a number from 1 to 4094 to define the NWA’s management VLAN group.
As Native VLAN Click this check box to enable As Native VLAN. If enabled, only untagged packets
may access to the CPU of NWA. If disabled, only tagged packets shall be forwarded
to the matched VLAN. Select this check box to treat this VLAN ID as a VLAN created
on the NWA and not one assigned to it from outside the network.
Green Ethernet
Energy Efficient
Ethernet (EEE)
Click the check box to enable Energy-Efficient Ethernet (EEE). When enabled, it turns
on power saving mode. If disabled, only tagged packets with matched VLAN-ID may
access the NWA.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 27 LAN IP (continued)
LABEL DESCRIPTION