Filter
Top Products
Chapter 6 Wireless LAN
NWA1000 Series User’s Guide
76
6.6.2.2 Wireless Client
Use this screen to employ WPA2 as the security mode for your NWA that is in wireless client
operating mode. Select WPA2 in the Security Mode field to display the following screen.
Figure 32 Security: WPA2 for Wireless Client
The following table describes the labels in this screen.
Reauthentication
Time
Specify how often wireless stations have to resend user names and passwords in order to
stay connected.
Enter a time interval between 0 and 3600 seconds. Enter “0” to turn reauthentication off.
Note: If wireless station authentication is done using a RADIUS server, the reauthentication
timer on the RADIUS server has priority.
Enable Group-Key
Update
Group Key Timer is the rate at which the RADIUS server sends a new group key out to all
clients. Click the check box to enable the Group Key Update and type a number between
100 and 3600 for the time rate.
Back Click Back to return to the previous screen.
Apply Click Apply to save your changes.
Cancel Click Cancel to begin configuring this screen afresh.
Table 18 Security: WPA2-MIX for Access Point (continued)
LABEL DESCRIPTION
Table 19 Security: WPA2 for Wireless Client
LABEL DESCRIPTION
Security Settings
Profile Name This is the name that identifying this profile.