Filter
Top Products
Prestige 2304 Support Notes
All contents copyright (c) 2005 ZyXEL Communications Corporation.
124
1. Trace LAN packet
2. Trace WAN packet
1. Trace LAN packet
1.1 Disable the capture of the WAN packet by entering: sys trcp channel mpoa00 none
1.2 Enable the capture of the LAN packet by entering: sys trcp channel enet0 bothway
1.3 Enable the trace log by entering: sys trcp sw on & sys trcl sw on
1.4 Wait for packet passing through the Prestige over LAN
1.5 Disable the trace log by entering: sys trcp sw off & sys trcl sw off
1.6 Display the trace briefly by entering: sys trcp brief
1.7 Display specific packets by using: sys trcp parse <from_index> <to_index>
2. Trace WAN packet
1.1 Disable the capture of the LAN packet by entering: sys trcp channel enet0 none
1.2 Enable the capture of the WAN packet by entering: sys trcp channel mpoa00 bothway
1.3 Enable the trace log by entering: sys trcp sw on & sys trcl sw on
1.4 Wait for packet passing through the Prestige over WAN
1.5 Disable the trace log by entering: sys trcp sw off & sys trcl sw off
1.6 Display the trace briefly by entering: sys trcp brief
1.7 Display specific packets by using: sys trcp parse <from_index> <to_index>
CLI Command List
The latest CI command list is available in release notes of every ZyXEL firmware release. Please go to
ZyXEL public WEB site http://www.zyxel.com/support/download.php to download firmware package
(*.zip), you should unzip the package to get the release note in PDF format.