Filter
Top Products
Prestige 2304 Support Notes
All contents copyright (c) 2005 ZyXEL Communications Corporation.
58
Configure parameters that determine when Prestige will forward WAN traffic to the backup gateway using
SMT Menu 11.6-Traffic Redirect Setup.
Menu 11.1 - Remote Node Profile
Menu 11.6 - Traffic Redirect Setup
Active= Yes
Configuration:
Backup Gateway IP Address= 192.168.1.50
Metric= 14
Check WAN IP Address= 202.13.154.1
Fail Tolerance= 5
Period(sec)= 30
Timeout(sec)= 3
Press ENTER to Confirm or ESC to Cancel:
Key Settings:
Active
Press [Space BAR] and select Yes (to enable) or No (to disable) traffic redirect setup.
Backup
Gatewa
y
IP
Address
The IP address of your backup gateway. Prestige automatically forwards outgoing traffic
to this IP address if Prestige's Internet connection terminates.
Metric
Enter a number from 1 to 15 to give your traffic redirect route a priority number. The
smaller the number, the higher priority the route has.
Check WAN IP
Address
Configure a reliable server on Internet (for example, your ISP's DNS server address) for
Prestige to check it's WAN connectivity periodically. If you leave this field as 0.0.0.0,
Prestige will check it's default gateway IP address instead.
Fail Tolerance
Specify the number of times your Prestige may attempt and fail to connect to Internet
before triggering traffic redirect connection.
Period
Specify the period that Prestige would check it's WAN connectivity.
Timeout
Specify the seconds that Prestige would wait for a response from the reliable server.