Filter
Top Products
Prestige 2602HWL-DxA Support Notes
All contents copyright (c) 2005 ZyXEL Communications Corporation.
127
Relay to PSTN
The Relay to PSTN field can be find under PSTN configuration WEB GUI in Relay to PSTN section. This field
is used to specify phone numbers to which the Prestige will always send calls through the regular PSTN phone
service without pushing prefix. In other words, numbers which specify on this field do not need to dial prefix
number to be dialed out. However, these numbers must be for phones on the PSTN (not VOIP phones) and
currently, P2602HWL –D1A support up to nine entries under this field.
After configuring the PSTN setup, click “Apply＂ to save changes back to P2602HWL – D1A.
Note: It is recommended to configure your local emergency services such as Police Dept, Fire Dept, Emergency
Medical services phone number in this field. Thus in any cases, these unit can be reach in case of emergency by
dialing their number without prefix, regardless if there are power loss.
How to connect Lifeline and DSL connection
To use both VOIP and regular phone service with P2602HWL-D1A＇s lifeline feature. You will need to
connect ADSL line and phone line appropriately and make proper configuration.
Making the correct connection it allows you to still receive phone calls while someone else is making outgoing
VoIP call though Prestige＇s 2 pots port, the following figure shows you how to connect your phone and
DSL service.
If your ADSL line type is Splitter type you ISP will provide you with splitter otherwise it should be splitterless.
For correct info you may check with your service provider as for which type of line you have.
Firgure 1 Splitter type