Filter
Top Products
Prestige 2602R Series Quick Start Guide
4
• Web Configurator Internet Access Wizard
2.1 Zero Configuration
Launch your web browser and
navigate to any web site (for
example, www.zyxel.com). The
Prestige automatically detects
and configures your Internet
connection. This may take about
two minutes.
If you have a PPPoE or PPPoA
connection, a screen displays
prompting you to enter your
Internet account information.
Enter the username, password and/or service name exactly as provided. Click Apply.
Note: Zero Configuration can only automatically configure the device for Internet access if you are
using PPPoE, PPPoA or ENET ENCAP encapsulation with a dynamically-assigned IP address
from your ISP.
If you’re not using these Internet access settings, then use the web configurator Internet Access
Wizard to manually configure the device.
If you want to set up a SIP account for VoIP calls, you should also configure the voice
configuration wizard screen (see Section 2.2.2 on page 7) or the Voice screen under Advanced
Setup.
2.2 Accessing the Web Configurator
1 Launch your web browser. Enter 192.168.1.1 as
the web site address.