Filter
Top Products
Prestige 630 ADSL USB Modem
Step 8. With OS 8.6 only, click the Protocol tab and make sure that the Use Protocol field is set to
PPP. Select the Connect automatically when starting TCP/IP applications, Allow error
correction and compression in modem and Use TCP header compression check boxes. Click
OK. Go to section 2.3 to set up a dial-up connection.
Figure 2-9 Remote Access: Protocol Tab (OS 8.6 Only)
2.3 PPPoA Dialup Connection Setup
Follow these steps to create a dial-up connection.
Step 1. Use one of the following methods to open Remote Access.
• Click the Apple icon, Control Panels and then Remote Access (see Figure 2-6).
Configuring Your Macintosh for Internet Access 2-15