Filter
Top Products
ZyXEL AG-320 User’s Guide
Chapter 4 Wireless Station Mode Configuration 49
4.3.1 Security Settings
When you configure the AG-320 to connect to a network with wireless security activated and
the security settings are disabled on the AG-320, the screen varies according to the encryption
method used by the selected network.
4.3.1.1 WEP Encryption
Figure 27 Station Mode: Security Setting: WEP
The following table describes the labels in this screen.
Connect Click Connect to associate to the selected wireless device.
Site Info Click an entry in the Available Network List table to display the information of the
selected wireless device.
Network Type This field displays the network type (Infrastructure or Ad-Hoc) of the wireless
device.
Channel This field displays the channel number used by each wireless device.
Encryption This field shows whether data encryption is activated (WEP, WPA-PSK, WPA,
802.1x, WPA2, WPA2-PSK) or inactive (Disabled).
MAC address This field displays the MAC address of the wireless device.
Surveyed at This field displays the time when the wireless device is scanned.
Table 7 Station Mode: Site Survey (continued)
LABEL DESCRIPTION
Table 8 Station Mode: Security Setting: WEP
LABEL DESCRIPTION
Security Setting
WEP Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Encryption Type Select an authentication method. Choices are Auto, Open System and Shared
Key.
Refer to Section 3.2.3.1.2 on page 39 for more information.