Filter
Top Products
ZyXEL AG-320 User’s Guide
Chapter 5 Access Point Mode Configuration 67
5.4 The Advanced Screen
To set the wireless LAN mode of the AG-320, click the Advanced tab.
Select 802.11b to allow only IEEE 802.11a compliant WLAN devices to associate with the
AG-320.
Select 802.11b+g to allow either IEEE802.11b or IEEE802.11g compliant WLAN devices to
associate with the AG-320. The transmission rate of your AG-320 might be reduced.
Click Save to save the changes to the AG-320.
Figure 44 Access Point Mode: Advanced
5.5 The MAC Filter Screen
The MAC Filter screen allows you to configure the AG-320 to give exclusive access to
(Accept) devices or exclude devices from (Reject) connecting to the AG-320. The MAC
address is assigned at the factory and consists of six pairs of hexadecimal characters, for
example, 00:A0:C5:00:00:02. You need to know the MAC address of the device(s) to
configure this screen. See Section 3.2.2 on page 38 for more information.
Save Click Save to save the changes.
Cancel Click Cancel to discard the changes.
Table 19 Access Point Mode: Configuration (continued)
LABEL DESCRIPTION