Filter
Top Products
ZyAIR G-2000 802.11g Wireless 4-port Router
17
The included desktop holder helps you organize the ZyAIR’s connection cables.
1. Secure the desktop holder to the back of the ZyAIR with the included screw.
2. Turn the desktop holder up to the right.
3. Refer to the Hardware Connections section. Connect the cables to the ports on the ZyAIR
through the desktop holder.
4. Turn the desktop holder down and place the unit on a flat, sturdy surface (on a desk or shelf).
Figure 2 Instructions using the Desktop Holder
Wall-mounted
Follow the steps to attach your ZyAIR to a wall.
1. Locate a high position on the wall that is free of obstructions.
2. Use screws with 6mm ~7.5mm (0.24" ~ 0.30") wide heads. Connect two screws (not included)
in the wall 80mm (3.15") apart. Do not screw the screws all the way into the wall. Leave a small
gap between the head of the screws and the wall.