Filter
Top Products
ZyWALL IDP 10 Quick Start Guide
12
5.
The Internet Protocol TCP/IP Properties screen
opens (the General tab in Windows XP).
-Click Use the following IP Address and fill in
the IP address (choose an used one from
192.168.1.1, 192.168.1.2 or from 192.168.1.4 to
192.168.1.254), Subnet mask (255.255.255.0),
and Default gateway (192.168.1.3) fields (if your
computer is connected directly to the ZyWALL
IDP.
Figure 6 Set IP Address
6.
Click OK to close the Internet Protocol (TCP/IP) Properties window.
7.
Click OK to close the Local Area Connection Properties window.
Checking Your Computer’s IP Address
1.
In the computer, click Start, (All) Programs, Accessories and then Command Prompt.
2.
In the Command Prompt window, type "ipconfig" and then press ENTER. Your computer’s IP
address must be in the correct range (192.168.1.1, 192.168.1.2 or from 192.168.1.4 to
192.168.1.254) with subnet mask 255.255.255.0 in order to communicate with the ZyWALL IDP.
Refer to your User’s Guide for detailed IP address configuration for other Windows and Macintosh
computer operating systems.
6.1 Accessing Your ZyWALL IDP Via Web Configurator
1. Launch your web browser. Enter “192.168.1.3” as the web site address.
The ZyWALL allows one management session at a time (console port, SSH
(Secure Shell) or web configurator in that order of priority). Make sure there is
not another management session already running before you try to start one.