Chapter 7 Wireless LAN
NBG-417N User’s Guide
95
7.11.1 Security Mode: Static WEP
Use this screen to configure the Static WEP security for your NBG-417N when it
is in AP + Bridge or Bridge Only mode.
Figure 54 Network > Wireless LAN > WDS (Static WEP)
Security Mode
Note: WDS security is independent of the security settings
between the NBG-417N and any wireless clients.
The WDS is set to No Security by default.
• Refer to Section 7.11.1 on page 95 to view the screen for Static
WEP security.
• Refer to Section 7.11.2 on page 97 to view the screen for WPA2-
PSK security.
Apply Click Apply to save your changes to NBG-417N.
Refresh Click Refresh to reload the previous configuration for this screen.
Table 35 Network > Wireless LAN > WDS
LABEL DESCRIPTION