Filter
Top Products
ZyXEL NBG-415N User’s Guide
47 Chapter 4 WAN
Figure 33 Basic: WAN: PPPoE
The following table describes the related fields in this screen.
Table 15 Basic: WAN: PPPoE
LABEL DESCRIPTION
MODES
WAN Select PPPoE if your ISP gives you Internet access account information (such as
the username and password).
PPPoE WAN
MODE
Address Mode Select Dynamic IP If your ISP did not assign you a fixed IP address. This is the
default selection.
Select Static IP If your ISP assigned a fixed IP address. The set the following
fields.
IP Address This field is applicable if you select Static IP in the Address Mode field.
Enter the IP address that your ISP gave you. This should be a static, public IP
address.
User Name Type the user name given to you by your ISP. You can use alphanumeric and -
_@$./ characters, and it can be up to 31 characters long.
Password Type the password associated with the user name above. Use up to 64 ASCII
characters except the [, ] and ?. This field can be blank.
Verify Password Type your password again for confirmation.