Filter
Top Products
ZyXEL NBG-415N User’s Guide
Chapter 7 Advanced 80
Manual Uplink
Speed
This field is not applicable when you select the Automatic Uplink Speed option
above.
Enter a number or select a pre-defined choice from the drop-down list box to
manually set the uplink speed for the WAN connection.
Connection
Type
Select Auto-detect to set the ZyXEL Device to automatically detect the Internet
connection type.
Select xDSL or Other Frame Relay Network if the ZyXEL Device connects to the
Internet via a DSL modem.
Select Cable or Other Broadband Network if the ZyXEL Device connects to the
Internet via a cable modem.
Detected xDSL
or Framerelay
Network
This field is applicable when you select Auto-detect in the Connection Type field.
This field displays the name of the detected line connection type.
Add StreamEngine Rule
Enable Select this option to enable this rule.
Name Enter a descriptive name for identification purposes.
Priority Specify a priority for the traffic type specified below. Enter a number between 1
(highest) and 255 (lowest).
Protocol Enter the protocol number or select a pre-defined protocol type from the drop-down
list box.
Source IP
Range
Specify one or a range of source IP addresses in the fields provided. Enter the same
IP address in the to field if you want to specify one IP address.
Source Port
Range
Specify one or a range of source port numbers. Enter the same number in the to field
if you want to specify one source port.
Destination IP
Range
Specify one or a range of destination IP addresses in the fields provided. Enter the
same IP address in the to field if you want to specify one IP address.
Destination Port
Range
Specify one or a range of destination port numbers. Enter the same number in the to
field if you want to specify one destination port.
Save Click Save to save the settings.
Clear Click Clear to start configuring this part of the screen again.
StreamEngine Rule List
Enable Select this option to activate this rule. Clear this check box to disable this rule without
deleting it.
Name THis field displays the descriptive name for the rule.
Priority This field displays the priority level (1 to 255) of this rule.
Source IP
Range
This field displays one or a range of source IP addresses.
Destination IP
Range
This field displays one or a range of destination IP addresses.
Protocol/Ports This field displays the protocol and port numbers.
Table 30 Advanced: StreamEngine (continued)
LABEL DESCRIPTION