Filter
Top Products
NXC-8160 User’s Guide
73
CHAPTER 9
Password
This chapter displays information on the password screen.
9.1 Configuring Password
Click Password to open the following screen. Use this screen to change the NXC-8160’s
management password.
Figure 29 Password
The following table describes the labels in this screen.
Table 25 Password
LABEL DESCRIPTION
Select the user name (admin, operator, or root) you want to configure in this
screen.
To access the web configurator, use the admin user name.
To configure the NXC-8160 through a secure SSH connection, use the admin or
operator user name.
To configure the NXC-8160 via the console port, you can use any one of the user
names.
The root user name has the highest priority. The admin user name has the
lowest priority. The root and operator user names can enable debug mode and
are for troubleshooting and customer support only.
Old Password Type the default password or the existing password you use to access the system
in this field. By default, the password is default for all the user accounts (admin,
operator, or root) on the NXC-8160.