Filter
Top Products
P-660R-TxC Series Quick Start Guide
5
2.3.2 Internet Access Setup
1 Configure the Internet access settings in this step. The wizard screens vary depending on the Mode and
Encapsulation you chose in the first wizard screen.
Note: Enter the Internet access information given to you by your ISP exactly in each wizard screen. If
not given, leave the fields set to the default.
RFC 1483
A) Select Routing if your ISP gave
you an IP address and allows
multiple computers to share an
Internet account. Otherwise, select
Bridge. Then select RFC 1483.
B) Click Next.
C) If you selected Routing, enter the
IP address given by your ISP.
D) If you selected Routing, select
SUA Only when you have one
public IP address, Full Feature
when you have more than one
public IP address (for translation)
or None to disable NAT.
E) Click Next.
ENET ENCAP
A) Select Routing, then ENET
ENCAP.
B) Click Next.
C) If your ISP gave you an IP
address, subnet mask and
gateway address, select
Static IP Address and enter
them. Otherwise, select
Obtain an IP Address
Automatically.
D) Select SUA Only if you
have one public IP address,
Full Feature if you have
more than one public IP
address (for translation) or
None to disable NAT.
E) Click Next.
A
C
D
B
E
A
C
D
B
E