Filter
Top Products
ENGLISH
7
If none of the LED are on, check your connections. Make
sure that you have the power adaptor connected to the P-
870HN-51b and plugged into an appropriate power source.
Make sure the power source is turned on. Turn the P-
870HN-51b off, wait for a few seconds and turn it back on. If
the LEDs are still off, contact your local vendor.
Testing Internet Connection
After you have connected the hardware and turned on the P-870HN-51b,
open a web browser on your computer and go to any web site (for
example, www.zyxel.com) to test your Internet connection.
If you are prompted for a user name and password, enter the account
information as given by your Internet service provider (ISP).
If the INTERNET LED is off but the DSL LED is on, go to the Initial
Configuration section to configure your Internet access settings.
Initial Configuration
1. Open your browser and enter http://
192.168.1.1 (the P-870HN-51b's
default IP address) as the address.