Filter
Top Products
ENGLISH
9
If you cannot access the Internet and the INTERNET LED is
off, make sure you enter the correct information in the WAN
screens.
If you are using a new Internet account, contact your ISP to
make sure it is active.
If you are trying to access the Internet wirelessly, make sure
the wireless and security settings in your wireless client are
the same as the settings in the P-870HN-51b.
Wireless Setup
To create a wireless network, the P-870HN-51b and your wireless
computer(s) must all use the same SSID (network name), channel and
security settings.
1. Go to Network > Wireless LAN.
2. Enable wireless LAN, enter a name to identify your wireless network
(such as “ZyXEL“) in the SSID field, and select a channel which is not
used by neighboring wireless devices.
3. Select your security mode and configure wireless security settings. In
this example, the P-870HN-51b uses WPA2-PSK for data encryption.
If you do not set wireless security, anyone within range could use your P-
870HN-51b to access your network and the Internet.