Filter
Top Products
8
Internet Setup
When your Internet connection is setup correctly, the DSL and
INTERNET lights should be green.
If you cannot access the Internet and the INTERNET light is
off, make sure you enter the correct information in the WAN
screens. If you are using a new Internet account, contact
your ISP to make sure it is active. If you are trying to access
the Internet wirelessly, make sure the wireless and security
settings in your wireless client are the same as the settings
in the P-870HW-51a v2.
Wireless Setup
To create a wireless network the P-870HW-51a v2 and your wireless
computer(s) must all use the same SSID (network name), channel and
security settings.
1. Go to Network > Wireless LAN.
2. Enable wireless LAN, enter a name to identify your wireless network
(such as “ZyXEL“) in the SSID field, and select a channel which is not
used by neighboring wireless devices.
3. Select your security mode and configure wireless security settings. In
this example, the P-870HW-51a v2 uses WPA2-PSK for data
encryption.
If you do not set wireless security, any one within range could use your
P-870HW-51a v2 to access your network and the Internet.