Filter
Top Products
Prestige 641 ADSL Internet Access Router
Troubleshooting 11-1
Chapter 11
Troubleshooting
11.1 Problems Starting Up the Prestige
Table 11-1 Troubleshooting the Start-Up of your Prestige
Problem Corrective Action
None of the LEDs are on when
you power on the Prestige
Check the connection between the AC adapter and the Prestige.
If the error persists, you may have a hardware problem. In this case
you should contact technical support.
1.Check to see if the Prestige is connected to your computer’s serial
port.
VT100 terminal emulation
9600 bps
Cannot access the Prestige via
the console port.
2. Check to see if the
communications program is
configured correctly. The
communications software should
be configured as follows:
No parity, 8 Data bits, 1 Stop bit.
This chapter covers the potential problems you may
run into and the possible remedies. After each
problem description, some instructions are provided
to help you to diagnose and to solve the problem.