Filter
Top Products
Chapter 45 Access Control
XGS4700-48F User’s Guide
402
45.3.4 Configuring SNMP
From the Access Control screen, display the SNMP screen. You can click Access
Control to go back to the Access Control screen.
Figure 221 Management > Access Control > SNMP
mactable MacTableFullEventOn 1.3.6.1.4.1.890.1.5.8.54.3
1.2.1
This trap is sent when more
than 99% of the MAC table is
used.
MacTableFullEventClear 1.3.6.1.4.1.890.1.5.8.54.3
1.2.2
This trap is sent when less than
95% of the MAC table is used.
rmon RmonRisingAlarm 1.3.6.1.4.1.890.1.5.1.1.16
.0.1
This trap is sent when a variable
goes over the RMON "rising"
threshold.
RmonFallingAlarm 1.3.6.1.4.1.890.1.5.1.1.16
.0.2
This trap is sent when the
variable falls below the RMON
"falling" threshold.
cfm dot1agCfmFaultAlarm 1.3.111.2.802.1.1.8.0.1 The trap is sent when the
Switch detects a connectivity
fault.
Table 149 SNMP Switch Traps (continued)
OPTION OBJECT LABEL OBJECT ID DESCRIPTION