Filter
Top Products
ZyXEL AG-220 User’s Guide
Chapter 5 Access Point Mode Configuration 79
Figure 53 Access Point Mode: MAC Filter
The following table describes the labels in this screen.
Table 21 Access Point Mode: MAC Filter
LABEL DESCRIPTION
Filter Type Define the filter action for the list of MAC addresses in the MAC address filter table.
Select Disable to deactivate the MAC filter feature.
Select Reject to block access to the AG-220, MAC addresses not listed will be
allowed to access the AG-220.
Select Accept to permit access to the AG-220, MAC addresses not listed will be
denied access to the AG-220.
Filter MAC
Address 1-16
Specify the MAC address(es) of the wireless station(s) that is allowed or denied
association to the AG-220.
Enter six pairs of hexadecimal digits (separated by colons) in the range of “A-F”,
“a-f” and “0-9” (for example, 00:A0:C5:00:00:02).
If you enter an invalid MAC address, once you click Save to save the values, a
warning screen will be displayed.
Save Click Save to save the changes to the AG-220.
Cancel Click Cancel to discard the changes.