Address Management Configuration Example 53
To configure an address management IP address pool on GigabitEthernet 1/0/1,
allowing 20 IP addresses starting from 202.10.20.1 to 202.10.20.20 to access the
network, enter the following:
[S5500] interface GigabitEthernet 1/0/1
[S5500-GigabitEthernet 1/0/1] am ip-pool 202.10.20.1 20
Configuration Example
of Binding the MAC
Address and IP Address
of a Legal User
Network requirements
The GigabitEthernet1/0/1 port of the switch is connected to multiple PCs.
Network diagram
Figure 13 Network diagram for address management
Configuration procedure
To configure to bind MAC addresses and IP addresses to GigabitEthernet 1/0/1, only
allowing a PC whose MAC address is 00e0-fc00-3900 to access the network by using
the IP address 202.10.20.30, enter the following:
<S5500> system-view
[S5500] interface GigabitEthernet 1/0/1
[S5500-GigabitEthernet 1/0/1] am user-bind mac-addr 00e0-fc00-3900
ip-address 202.10.20.30
External network
Hub
External network
Hub
