- 5 -
Windows 95 Installation
Windows 95 released two major versions at the time
when this manual is written. The first version ( refer to
“Native Windows 95” afterward ) supports for 16-bit
PC Card but not for CardBus PC Card. The latest
version Windows 95 with OEM Service Release #2
( refer to OSR2 Windows 95 or later ) supports both
16-bit and CardBus PC Card. The CardBus 10/100M
Ethernet PC Card could operates in either Native or
OSR2 version Windows 95 environments. However,
the installation procedures are different. The section
will presents you how to identify your version of
Windows 95 first. Then you could decide which kind
of installation process should be followed:
Determining the Version of Windows 95
1. After successfully booting and login the Windows
95. Click on the Start Button.
2. Select the Settings.
3. Select Control Panel.
4. Within the Control Panel, double-click the
System icon.
5. Select the General Tab, this system information
will displayed like the following figure.
