- 8 -
12. Click OK. A dialog box will appear to adjust the
driver's settings. The resources assignment to
adapter should be uniqe in the system.
13. The Newwork window reopens.
14. Click OK
15. Insert your original Windows 95 CD or disk set.
Input the drive which contain the source. Click OK
16. After the copy file process is complete, the system
will promt you to restart the Computer.
17. For the first time installation, you need to go to the
Network in the Control Panel to setup the
protocols, clients and services properly according
to your need.
Note: If you start the computer without the CardBus
10/100 Ethernet PC Card installed in the socket,
the native Windows 95 system will prompt you
the warning message “Your Network Adapter
CardBus Fast Ethernet 10/100 Adapter
manual load”[0001] is not working properly.
