2 –Pump 18-Station Controllers Chapter 3: Installation 20 of 44
Figure 11: Third Pump Setup Screen
The screen shown above allows you to set the number of times the system will convey
material before cleaning, the number of cleaning pulses that will be sent, the amount of
time (in seconds) that the vacuum will remain on, and the amount of time that the
vacuum will vent the system. When pressed individually, the keypad will come up
allowing you to enter the necessary values for each feature.
6. Press BACK to return to the second Pump Setup screen, then BACK again. This will
take you to the Hour Meter Screen. Once all features have been set, press MENU.
This will return you to the MAIN MENU.
See page 37 for details on the options and their default settings.
Setting Alarm Clock
When you are in the Main Menu, you will see a button labeled SET CLOCK. Press this
button and the following screen will appear.
In this screen the user can set the variables which are used to time and date stamp alarms.
This feature works in conjunction with the ALARM screen (See page 33) to notify the user of
issues which the conveying system had encountered during its operation.
Setting Values
Pressing the individual numbers in the second row of the screen shown above, the operator
can select the field (Month, Day, Year, Hours and Minutes) he wishes to change.
Enter the values you would like to set by pressing the number keys. Press ENT (Enter) when
you are finished to set the new values or CLR (Clear) to erase the current values and reenter
new ones. Press END to return back to the CLOCK MENU screen.
Press the SYSTEM MENU button in the CLOCK MENU SCREEN to return back to the
system menu screen and the next set of programmable features.
Finishing Setup: Setting Up Passwords
You can set up passwords for two levels of security: for operators and for setup personnel.
The controller comes from the factory with neither password set. This allows every user
access to all functions.
