2 –Pump 18-Station Controllers Chapter 4: Operation 33 of 44
4-4 Alarms
Reviewing Alarms
To review your system’s alarms, touch ALARM HISTORY on the Main Menu. The “Alarm
Log” screen appears, with the newest alarm listed first.
Figure 19: Alarm Log Screen
To scroll up and down through the list, touch DOWN or UP at the bottom of the screen.
Press MENU to return to the Main Menu screen.
Silencing Alarms
Whenever a new alarm occurs, your controller sounds the horn and turns on the strobe light at
each central alarm.
Touch SILENCE on the alarm message banner that appears when a new alarm occurs.
The horns and lights at the central alarms turn off. Your controller has separate, configurable
settings for how long the horns should remain silent and how long the light should remain off.
If the alarm condition still exists when either of these times elapses, the corresponding device
(horn or light) turn on again and the alarm message banner appears. If a new alarm occurs,
both horns and lights turn on. See page 38 for a list of alarms and their possible causes.
