Adam Equipment 9520 Manual

A SERVICE OF

next previous

8.3ZERORANGE /ZEROTRACKIN G/WEIGHTUNITSETUP

Theparam eter‘Ut ABCD’willallowsettingsforinitialzerorange,autozerorange,

the secondaryweighing unitand theprimary weighing unit.The‘ ABCD’ are 4

numbers that describe the operation when they are set as shown below.

InitialZerorange=A

1) ‘Ut ABCD’willbedisplayed.

2) Theinitialzerorange(Avalue)allowedwhenpowerisfirstturnedon,1to9

mean10%to90%ofmaximum.0meansdonotsettheinitialzero.

3) Press the [M+ Print]key to changethe flashing digit andthe [Print]key to

incrementthedigit.

AutoZerorange=B

4) Therangetheautozerowillbeactivewithin(Bvalue)issetbythenextdigit.

1to9means0.3divisionsto2.7divisions.(Bx0.3d).0meansautozerois

disabled.

SecondaryWeightunit=CandPrimaryWeighingunit=D

ThevaluesofCandDcanbesettoarangeof0‐9,howeverthefollowing arethe

onlyactivesettings:

‘Ut XX10’ allowsthe[Mode]keytoselecteitherkilogramsorpounds.Thescaleis

calibratedinkilograms.

‘Ut XX00’ allowsonlythekilogrammode.

‘Ut XX01’ allowsonlythepoundsmode

Aftersettingthe4valuespressthe [Mode]keytoconfirmandadvancetothe

nextparameter.

20|Page©AdamEquipmentCompany2008