Advanced Control Suite for the AT-2931SX Adapter User’s Guide
57
Note
Baspcfg can only be executed in Super User mode. Attempting to
use baspcfg as a standard user yields the following error message,
"Error in communicating to BASP Module. Is it loaded?".
When configuring Teaming, one Primary Adapter is required.
tname ASCII string of the team
vlan_id VLAN ID: from 1 to 4094,
0=untagged or no VLAN
vname ASCII string of the virtual
device
macaddr MAC address (optional), for
example, 00:10:18:00:11:44
role Role of the physical device:
0=primary, 1=hot-standby
device ASCII string of the physical
device, for example, eth0
Table 5. Parameter Descriptions (Continued)
Parameter Description
