17
GND
PWRBTN#
PLED-
PLED+
DUMMY
RESET#
GND
HDLED+
HDLED-
1
+5V
DUMMY
DUMMY
SPEAKER
1
Serial ATA (SATA) Please connect the black end of
Power Cable SATA power cable to the power
(Only for P4S55FX+ motherboard) connector on each drive. Then
(Optional) connect the white end of SATA
power cable to the power
connector of the power supply.
USB 2.0 Header ASRock I/O Plus
TM
provides you
(9-pin USB67) 6 default USB 2.0 ports on the
(see p.7 No. 21 / p.8 No. 19) rear panel. If the rear USB ports
are not sufficient, this USB 2.0
header is available to support 2
additional USB 2.0 ports.
Infrared Module Header This header supports an optional
(5-pin IR1) wireless transmitting and
(see p.7 No. 17 / p.8 No. 15) receiving infrared module.
Internal Audio Connectors These connectors allow you
(4-pin CD1, 4-pin AUX1) to receive stereo audio input
(CD1: see p.7 No.28 / p.8 No. 26) from sound sources such as
(AUX1: see p.7 No.27 / p.8 No. 25) a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.
Front Panel Audio Header This is an interface for the front
(9-pin AUDIO1) panel audio cable that allows
(see p.7 No.26 / p.8 No. 24) convenient connection and
control of audio devices.
System Panel Header This header accommodates
(9-pin PANEL1) several system front panel
(see p.7 No.18 / p.8 No. 16) functions.
Chassis Speaker Header Please connect the chassis
(4-pin SPEAKER 1) speaker to this header.
(see p.7 No.20 / p.8 No. 18)
connect to the
power supply
connect to the SATA
HDD power connector
DUMMY
GND
+5V
IRTX
IRRX
1
CD-R
GND
GND
CD-L
AUX-R
GND
GND
AUX-L
CD1
AUX1
USB_PWR
USB_PWR
P+7
P-7
P+6
P-6
GND
GND
DUMMY
1
GND
GND
+5VA
BACKOUT-R
BACKOUT-L
AUD-OUT-L
AUD-OUT-R
MIC-POWER
MIC
1
