30
OnBoard Serial Port
Use this to set addresses for the on-board serial ports or disable serial
ports. Configuration options: [Auto], [Disabled], [3F8 / IRQ4 / COM1],
[2F8 / IRQ3 / COM2], [3E8 / IRQ4 / COM3], [2E8 / IRQ3 / COM4].
OnBoard Infrared Port
You may select [Auto] for the on-board infrared port feature, which will
enable this feature if the infrared module is installed. Or you may disable
the feature by selecting [Disabled].
OnBoard Parallel Port: Select Parallel Port address or disable Parallel Port.
Configuration options: [Auto], [Disabled], [378], [278].
Parallel Port Mode: Set the operation mode of the parallel port. The
default value is [ECP+CPP]. If this option is set to [ECP+EPP], it will
show the EPP version in the following item, “EPP Version”.
OnBoard Midi Port: Select address for Midi Port or disable Midi Port.
Configuration options: [Disabled], [330], [300].
Midi IRQ Select: Use this to select Midi IRQ.
OnBoard Game Port: Select address for Game Port or disable Game Port.
Configuration options: [Disabled], [200], [208].
OnBoard IDE: This allows you to enable or disable the onboard IDE controller.
OnBoard SATA: This allows you to enable or disable the onboard SATA
controller. This option is available only for P4S55FX+ motherboard.
OnBoard LAN: This allows you to enable or disable the onboard LAN feature.
OnBoard AC’97 Audio: Select [Disabled], [Auto] or [Enabled] for the onboard
AC’97 Audio feature.
System Hardware Monitor: You can check the status of the hardware on your
system. It allows you to monitor the parameters for CPU temperature,
Motherboard temperature, CPU fan speed, and critical voltage.
AMIBIOSSETUPUTILITY-VERSION3.31a
Advanced
CPUTemperature
M/B
CPUFanSpeed
Vcore
+ 3.30V
Temperature
ChassisFanSpeed
+ 5.00V
+ 12.00V
[ SetupHelp ]
F1:Help
Esc:PreviousMenu
F9:SetupDefaults
F10:Save&Exit
+/-:ChangeValues
Enter:Select
Sub-Menu
:SelectItem
System Hardware Monitor
35C/ 95F
27C/ 82F
3110 RPM
N/A
1.601 V
3.312 V
4.972 V
12.161V
