BaracodaManager for PC – User Guide v3.39 - 41 -
Data Capture
for Workforce
in Motion
11. Baracoda TagRunners settings
The Settings window displays eight buttons and five groups:
- General information
- Current Operating Mode information
- Shutdown Timer information
- Battery
- Other Settings
The following two tables show the General information fields:
Bluetooth name of the RFID reader
Version of embedded Baracoda software
Version of the RFID engine
The table below shows the user the Operating Mode options that they can set:
Set the batch mode: scanned barcodes are stored in non-volatile memory and
can be uploaded to the application later (click on “Batch config” for more
advanced settings)
Set the Real-time mode: scanned barcodes are transmitted to the application
immediately when the Bluetooth radio connection is active. If the connection
is not established the barcodes are lost, unless “Enable Buffering” is set (see
below).
The following table shows the Shutdown Timer fields that you can set:
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is connected and without any activity.
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is not connected and without any activity.
The following table shows the Battery field:
Battery level (0-100%) and its current charging status.
The following table shows the Other Settings buttons that you can set:
