BaracodaManager for PC – User Guide v3.39 - 59 -
Data Capture
for Workforce
in Motion
14. BCM2604 settings
The Settings window displays five buttons and four groups:
- General information
- Current Operating Mode information
- Shutdown Timer information
- Other Settings
The following two tables show the General information fields:
Version of Bluetooth chipset
Version of embedded Baracoda software
Bluetooth name of the barcode reader
The table below shows the user the Operating Mode options that they can set:
Set the Real-time mode: scanned barcodes are transmitted to the application
immediately when the Bluetooth radio connection is active. If the connection
is not established the barcodes are lost, unless “Enable Buffering” is set (see
below).
Set the Master mode: The barcode reader automatically creates connection
to the specified Host device when the user scans a barcode. Then the reader
works as in real time mode.
For use in Master mode : Set, in the address field, the Bluetooth address of
the host device the reader has to connect to.
The following table shows the Shutdown Timer fields that you can set:
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is connected and without any activity.
Set the delay (in minutes) after which the barcode reader switches off, when
the barcode reader is not connected and without any activity.
The following table shows the Other Settings buttons that you can set:
Access product settings (see below)
Access Bluetooth connection settings (see below)
