
BOULDERLINK ID
Pressing the DISPLAY pushbutton again will make “PROGRAM
BOULDER LINK, BOULDER LINK ID 0” show in the display. Rotating
the volume control changes the ID number. For more information
consult the Boulderlink section.
Unless you are using two or more 865 Integrated Amplifiers together,
this setting should be left at “0.”
REMOTE ID
Pressing the DISPLAY pushbutton again will make “PROGRAM
REMOTE ID, REMOTE CONTROL ID 5” show in the display. Rotating
the volume control changes the ID number. This feature is used in
conjunction with a wiring change in the remote control and should
always be left set at “5.” Consult your dealer to change this setting.
BOULDERLINK SPEED
Pressing the DISPLAY pushbutton again will make ”BOULDERLINK
SPEED, 62500 BAUD-Standard” show in the display. Rotating the
volume control changes the baud rate. This feature increases the 1012’s
compatibility with other brands of equipment. Consult your dealer
before changing this setting.
4-7
PROGRAMMING