236 Brocade MLX Series and NetIron XMR Hardware Installation Guide
53-1002373-02
Installation precautions
4
General precautions
Follow these general precautions when installing a Brocade NetIron XMR router.
The procedures in this manual are for qualified service personnel.
If the installation requires a different power cord than the one supplied with the router, make
sure you use a power cord displaying the mark of the safety agency that defines the regulations
for power cords in your country. The mark is your assurance that the power cord can be used
safely with the router.
All fiber-optic interfaces use Class 1 Lasers.
Do not install the router in an environment where the operating ambient temperature might
exceed 40
C (104
F).
Make sure the air flow around the front, sides, and back of the router is not restricted.
If you do not install a module in a slot, you must keep the slot blank in place. If you run the router
with an uncovered slot, the system may overheat.
Never leave tools inside the router.
Power precautions
