Infotainment System 97
Radio Commands
The commands are only available
while in one of the following
audio modes, AM, FM, XM™
(if equipped), or WX (if equipped).
Radio: Instructs the system to turn
the audio system on.
Radio turn off: Instructs the
system to turn the audio system off.
Radio [set] balance center:
Instructs the system to set the fade
or balance to the center and middle.
Radio scan up, radio scan
down: Instructs the system to scan
up or down through radio stations.
Radio [band] [select] AM, radio
[band] [select] FM, radio [band]
[select] XM, radio [band] [select]
satellite, radio [band] [select] WX,
radio [band] [select] weather
band: Instructs the system to go to
either the AM, FM, XM (if equipped),
or WX (if equipped) radio bands.
Radio [select] (frequency) AM,
radio [select] (frequency) FM,
radio [select] (channel) weather
band: Instructs the system to
go to a specific frequency on
either the AM, FM, or weather
bands — examples; Radio select
ninety seven point one FM, Radio
select one weather band, Radio
select ten forty AM.
Radio [select] (channel) XM, radio
[select] (channel) satellite:
Instructs the system to go to a
specific channel on the XM™ band
(if equipped) — example; Radio
select one fifty one XM.
Radio [show] [next] presets:
Instructs the system to change to
the next presets on the active band.
Radio help: Instructs the system to
assist with radio commands. The
radio commands displays on the
screen.
The word “middle” can be
substituted in place of the word
“center”.
The word “fade” can be substituted
in place of the word “balance”.
CD Commands
The following commands are only
available when a CD, MP3, or DVD
is loaded.
CD: Instructs the system to turn the
audio system CD/DVD changer on.
CD, CD turn off: Instructs the
system to turn the audio system CD/
DVD changer off.
CD [set] balance center: Instructs
the system to set the fade and
balance to the center position.
CD scan up: Instructs the system
to scan upward through tracks.
CD select [disc] (one, two, etc.)
track (one, two, etc.): Instructs the
system to go to a specific disc and
chapter/track.
CD eject [disc] (one, two, three,
four, five, or six): Instructs the
system to eject a specific
numbered disc.
