65Faxing
Receiving Faxes
Flow of Receiving Faxes
The operation flow of receiving faxes is as follows:
Step 1
Select a receive mode.
See “Selecting a Receive Mode” on page 65.
Step 2
Load A4, Letter, or Legal-sized paper.
See “Loading Paper” on page 14.
Step 3
Confirm the paper settings and adjust them as needed.
See “Changing the Print Settings” on page 70.
Selecting a Receive Mode
Select a receive mode according to your needs.
z When you have a dedicated telephone line for fax use only:
Select FAX only mode.
z When you are using a single telephone line for faxes and voice calls:
If you receive mainly voice calls and sometimes faxes, select TEL priority mode.
If you receive mainly faxes and sometimes voice calls, select FAX priority mode.
z When you subscribe to a ring pattern detection service provided by your telephone company.
(Not available depending on the country or region of purchase.): Select DRPD or Network
switch.
Important
z The machine cannot receive faxes when the power is turned off. Press the ON/OFF button to
turn the power on.
z To cancel receiving, press the Stop/Reset button and follow any instructions on the LCD.
Note
If you do not have a dedicated phone line for fax use only, you need to connect a telephone or an
answering machine to the External Device Jack of this machine.
