24-29
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
• Select H.323 Map, page 24-33
• Select HTTP Map, page 24-34
• Select IM Map, page 24-34
• Select IPSec-Pass-Thru Map, page 24-35
• Select MGCP Map, page 24-35
• Select NETBIOS Map, page 24-36
• Select RTSP Map, page 24-36
• Select SCCP (Skinny) Map, page 24-37
• Select SIP Map, page 24-37
• Select SNMP Map, page 24-38
Rule Actions > Protocol Inspection Tab
Fields
• CTIQBE—Enables application inspection for the CTIQBE protocol.
• DCERPC—Enables application inspection for the DCERPC protocol.
–
Configure—Displays the Select DCERPC Map dialog box, which lets you select a map name
to use for this protocol.
• DNS—Enables application inspection for the DNS protocol.
–
Configure—Displays the Select DNS Map dialog box, which lets you select a map name to use
for this protocol.
• ESMTP—Enables application inspection for the ESMTP protocol
–
Configure—Displays the Select ESMTP Map dialog box, which lets you select a map name to
use for this protocol.
• FTP—Enables application inspection for the FTP protocol.
–
Configure—Displays the Select FTP Map dialog box, which lets you select a map name to use
for this protocol.
• GTP—Enables application inspection for the GTP protocol.
–
Configure—Displays the Select GTP Map dialog box, which lets you select a map name to use
for this protocol.
Note GTP inspection is not available without a special license.
• H323 H225—Enables application inspection for the H323 H225 protocol.
–
Configure—Displays the Select H323 H225 Map dialog box, which lets you select a map name
to use for this protocol.
• H323 RAS—Enables application inspection for the H323 RAS protocol.
–
Configure—Displays the Select H323 RAS Map dialog box, which lets you select a map name
to use for this protocol.
• HTTP—Enables application inspection for the HTTP protocol.
