24-35
Cisco ASDM User Guide
OL-16647-01
Chapter 24 Configuring Application Layer Protocol Inspection
Service Policy Field Descriptions
Select IPSec-Pass-Thru Map
The Select IPSec-Pass-Thru dialog box lets you select or create a new IPSec map. An IPSec map lets
you change the configuration values used for IPSec application inspection. The Select IPSec Map table
provides a list of previously configured maps that you can select for application inspection.
Fields
• Use the default IPSec inspection map—Specifies to use the default IPSec map.
• Select an IPSec map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Modes
The following table shows the modes in which this feature is available:
Select MGCP Map
The Select MGCP Map dialog box lets you select or create a new MGCP map. An MGCP map lets you
change the configuration values used for MGCP application inspection. The Select MGCP Map table
provides a list of previously configured maps that you can select for application inspection.
Fields
• Use the default MGCP inspection map—Specifies to use the default MGCP map.
• Select an MGCP map for fine control over inspection—Lets you select a defined application
inspection map or add a new one.
• Add—Opens the Add Policy Map dialog box for the inspection.
Modes
The following table shows the modes in which this feature is available:
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
Firewall Mode Security Context
Routed Transparent Single
Multiple
Context System
• • • •—
