CHAPTER
12-1
Cisco ONS 15310-CL, ONS 15310-MA, and ONS 15310-MA SDH Ethernet Card Software Feature and Configuration Guide, R9.1 and R9.2
78-19415-01
12
Configuring Quality of Service on the ML-Series
Card
This chapter describes the Quality of Service (QoS) features built into your ML-Series card. It also
describes how to map QoS scheduling at both the system and interface levels.
This chapter contains the following major sections:
•
Understanding QoS, page 12-2
•
ML-Series QoS, page 12-4
•
QoS on RPR, page 12-9
•
Configuring QoS, page 12-10
•
Monitoring and Verifying QoS Configuration, page 12-16
•
QoS Configuration Examples, page 12-17
•
Understanding Multicast QoS and Multicast Priority Queuing, page 12-23
•
Configuring Multicast Priority Queuing QoS, page 12-24
•
QoS not Configured on Egress, page 12-26
•
ML-Series Egress Bandwidth Example, page 12-26
•
Understanding CoS-Based Packet Statistics, page 12-28
•
Configuring CoS-Based Packet Statistics, page 12-29
•
Understanding IP SLA, page 12-30
The ML-Series card employs the Cisco IOS Modular QoS Command-line Interface (MQC). For more
information on general MQC configuration, refer to the following Cisco IOS documents:
•
Cisco IOS Quality of Service Solutions Configuration Guide, Release 12.2 at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122mindx/l22index.htm
•
Cisco IOS Quality of Service Solutions Command Reference, Release 12.2 at this URL:
http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122cgcr/fqos_r/index.htm
